-NEW- Eisen 1440E Precision Engine Lathe
High quality precision lathe, Made in Taiwan.
Features
- 14″ swing x 40″ distance between centers
- Hardened and ground bed ways
- Hardened and ground gears in headstock
- D1-4 camlock spindle with 1 9/16″ spindle bore
- Spindle speed up to 2,000 RPM
- 3 HP main motor
- Precision taper roller bearings in spindle
- Rapid foot-operated brake
- Oil bath headstock, gearbox and apron lubrication
PLEASE NOTE: the taper turning attachment (TTA) shown in the photos is optional equipment and not included in standard package.
Specifications
Model | 1440E |
Swing over Bed | 14″ |
Swing over Cross Slide | 8 3/4″ |
Swing in Gap | 20 3/4″ |
Distance between Center | 40″ |
Width of Bed | 7 9/16″ |
Spindle Nose | D1-4 |
Spindle Bore | 1 9/16″ |
Taper of Spindle | M.T.#5 |
Spindle Speeds | 9 Steps, 82 ~ 2000 RPM |
Leadscrew Diameter | 15/16″ |
Leadscrew Pitch | 4 TPI |
Inch Threads | 3 ~ 56 T.P.I (32 kinds) |
Metric Threads | 0.4mm ~ 7.2mm (30 kinds) |
Longitudinal Feed Range | 0.0016″~0.03″ /rev |
Cross Feed Range | 0.0008″~0.015″ /rev |
Cross Slide Travel | 6 7/8″ |
Compound Slide Travel | 4″ |
Tailstock Quill Diameter | 1 9/16″ |
Tailstock Quill Taper | M.T. #3 |
Quill Travel | 4 3/8″ |
Main Motor | 3 HP, 220V, 3-phase |
Coolant Pump | 1/8 HP |
Net Weight | 1364 lbs |
Gross Weight | 1584 lbs |
Packing Measurement Approx(Lxwxh ) | 73″x30″x58″ |
Included Accessories
- 6″ 3-jaw chuck
- 8″ 4-jaw chuck
- 4-way tool post
- Steady rest
- Follow rest
- Face plate
- DRO (SW4000)
- Chuck cover with safety switch
- Full length splash guard
- Coolant system
- Dead centers
- Center sleeve
- Manual & parts list
Optional Accessories
- 5C Collet Closer with installation: $550
- 5C Collet Set (1/8″ ~ 1″ by 16th, 15pcs): $150
- Taper turning attachment (TTA): $775